Injin nadawa mai mazugi zuwa madaidaiciya
Aikin fasaha
Injin Yin Silinda na WFGA137-B na sakawa shine a kwance layin rini na katako tare a murɗa shi zuwa cuku, tare da yanayin babban fakiti, ƙarancin haɗi ko inuwa mai launi, babu injin niƙa zare da kakin zuma mai rarrabawa sosai. Baya ga kasancewarsa mai kyau kuma mai sauƙin cirewa, injin sabon injin na'urar naɗawa ce mai wayo wacce ta haɗa kwamfuta, mitar AC mai canzawa, sarrafa servo da sauran fasahohin zamani.
Ƙayyadewa
| Adadin zaren | 7S ~ 40S |
| Faɗin da ake da shi na walƙiya mai lanƙwasa | 1600mm 1800mm |
| Diamita na takardar diski na katako mai lanƙwasa | 800mm 1000mm |
| Saurin yin silinda | 0~130m/min |
| Tsawon silinda da ake yi | Zaren 20S mita 35000 |
| Adadin kan da ake amfani da shi wajen yin silinda | 400-600(an ayyana mai amfani） |
| Na'urar duba aiki | Allon taɓawa na inci 5.5 |
| Ƙarfin wutar lantarki na shigarwa | 3 × 380V ± 10% |
| Ƙarfin da aka shigar | Injinan servo guda 3, 3KM kowanne |
| Girman Tashar Sashe | 1800 mm (faɗi) X 1000 mm (dia.) |
| Gano Ƙarshen Hutu | Firikwensin Motsi na Infer-Red |
| Lambar Mazugi | ≤576 |
| Tashin hankali | 30 ~ 50 g/ƙarshe |
| Girman mazugi | Ø78 mm X L100mm |
| Cikakken nauyin kayan aiki | 7000kg |
Fasalin Aiki
1. Sarrafa tsarin ajiye motoci da saurin shafts na sama da ƙasa ta atomatik ta amfani da sanannen mai sarrafawa na duniya.
2. Mai dacewa kuma kai tsaye don sa ido kan yadda kayan aiki ke gudana da kuma nazarin kuskuren ta hanyar amfani da allon taɓawa mai shahara a duniya.
3. Tabbatar da cewa ka huta a cikin saurin layi mai ɗorewa ta amfani da na'urar sarrafawa da injin da ta shahara a duniya.
4. Ana sanya faranti masu inganci a matsayin allon bango na hagu da dama, suna da tsari mai kyau da kuma tsauri, wanda ke sa kayan aikin su yi aiki da kyau.
5. A kiyaye hasken warp daga faɗuwa don cutar da ma'aikata lokacin da wutar lantarki da iskar gas ke kashewa lokaci-lokaci ta amfani da tsarin tallafi na musamman na warp sticker.
6. Na'urar gano ƙarshen infrared ray mai fashewa tare da nuni, abin dogaro kuma mai sauƙin fahimta.
7. An sanya masa na'urar cire kakin zuma.
8. Yi silinda 400-600 sau ɗaya daga zaren yadin Denim na Knitting.
Babban sashin na'urar:
1. Tashar Gyaran Hanya da Tashar Aiki
2. Yankin haya tare da gano motsi na tsayawa
3. Yankin Creel tare da tsarin sake juyawa
4. Tsarin sarrafa tuƙi
1. Gyaran Kafa da Tashar Aiki
Akwai tsarin aiki mai nauyi tare da kwamitin tuƙi da aka gina a ciki.
Tsarin sarrafa iska, zubar da ruwa da kuma tsarin sarrafa sandar iska don katakon sashe.
Na'urar zana roba guda ɗaya (diamita 220 mm) tare da na'urorin SS guda biyu (diamita 125 mm) tare da sarrafa iska. Injin servo guda ɗaya mai ƙarfin 3KW don tuƙa na'urorin drawing nip.
A samar da birki na pneumatic bel domin sassauta hasken.
Ana iya daidaita faɗin ta hanyar tsefe
tsarin sarrafa HIM (allon taɓawa).
2. Yankin haya tare da gano motsi na tsayawa
Akwai tukwanen ido na yumbu a kan yankunan haya na kwance.
Firam ɗin tallafi da yawa kafin zaren ya shiga cikin creel.
Na'urar gano ƙarshen karya ta infra-red zare.
3. Yankin Creel tare da tsarin sake juyawa
Tsarin na'urar juyawa ta mutum ɗaya yana sarrafa maɓallin hagu da dama. Kuma motar AC mai ƙarfin 3KW a matsayin motar juyawa.
Tsarin na'urar jujjuyawa da yawa yana sarrafa mazubin kowane ɗaya. Na'urar jujjuyawar da aka yi da lanƙwasa tana jagorantar zaren don yin fakitin zaren da ya dace.
Daidaita Pr-tension a kowane ƙarshen.
An ƙara kakin zuma a kan na'urar a kowane ƙarshenta.
Sandunan tukunya na ido na kowane layi daga cikin creel.
4. Tsarin sarrafa tuƙi
Na'urorin sarrafawa guda uku na AC guda 3KW, don zana nip roll, hagu creel da dama creel rolling tuki
Ɗaya daga cikin kamfanonin PLC yana kula da dabaru da sarrafawa.
Launin HIM ɗaya (allon taɓawa) shine saitin sigogin sarrafawa.
a. Saitin saurin aiki. b. Saitin tashin hankali na hasken rana.
c. Saitin shimfiɗawa mai lanƙwasa.
d. Saitin yadi.
e. Mai rikodin tarihin laifin tsarin
5. Saita manyan sassan
| Lambar Serial | Suna | Samfuri/Bayani | Adadi | Alamar/Asalin |
| 1 | Mai sarrafa shirye-shirye (PLC) | FX3G-24MT/ES-A | 1 | Mitsubishi |
| 2 | Kariyar tabawa | GT1055 | 1 | Mitsubishi |
| 3 | Direban Servo | 3.5KW | 3 | Mitsubishi |
| 4 | Maido da direban servo | 3.5KW | 3 | Mitsubishi |
| 6 | Na'urar sanyaya iska ta masana'antu | SK-500W | 1 | RITTAL |
| 5 | Tallafin takarda mai ƙarfe na aluminum | 480 | ||
| 6 | Gangar rami | 5100 NA'URORI | 480 | |
| 7 | Na'urar cire gashi | 480 | ||
| 8 | Mota mai amfani da infrared-na'urar dakatarwa | 1 | ||
| 9 | Bearing | UCPA206 | 164 | NSK |
| 10 | Bearing | 627Z | 480 | NSK |
